Reuse and Recycle at its best! My building I harvest all my worms in, and the building I make all my worm bins in, Is made from 95% left over and reused materials and it looks great TOO!
My building is 16′ wide X 24′ long, the doors and windows were either given to me by someone, or they were bought at yard sales by us.
3 years ago we completely gave our house new siding,windows,doors,electical,etc 75% of the siding was left over from doing the house, so I only had to buy 200 sq ft of siding to complete the building.
I also needed to buy the cement mix to mix my cement. I can’t remember but I think I got 12 bags of cement. When I got to the electical, I was able to get a (breaker)panel box from my brother-in-law, the one that was in our house was too big, I only needed a small one for a building of this size.
For safety reasons I did not want to save money when it came to wiring the building, I bought the wire and the fixtures.
Well there you have it!! The cost of this building to me so far, I still need to do work inside,is $500.00.
WOW! Yes $500.00 dollars, The point I am getting to is (REDUCE,REUSE,,RECYCLE) And look at the great stuff you can do with Recycled Materials.
Till next Time….
Jeff
Written by Jeff on August 17th, 2008 with no comments.
Read more articles on About Earthworms and Composting with composting worms and Friendly Worm Guy Store and News and Worm Stories.
Here is an UPDATE on my Giant Sunflower, if you recall last weeks post where the sunflower was 8.5 feet tall.
We are having a little fun with this post WOW! I wonder how tall this plant will get too!
Check back again next week! so far we have a foot (12″) of grow per week,
Jeff
Written by Jeff on August 13th, 2008 with no comments.
Read more articles on News and playing around.
This great little school in Whitefish, Not only has composting worms in the classrooms and a great recycling program in place, RH Murray can now Clean all its waste water as well!
This article is from www.NorthernLife.ca news paper,(Sudbury Ontario) dated July 30, 2008
Here it is, enjoy!
R.H. Murray School in Whitefish is using an advanced wastewater system to treat its waste more efficiently. At the same time it is protecting nearby groundwater and streams, said Terry Luck, wastewater representative for Bionest Distribution Inc., based in Pembroke.
The $100,000-plus system was installed Monday. The company has installed 300 similar systems in southern Ontario, 6,000 in Quebec and 200 in Western Canada, said Luck.
Peter Firla, environmental engineer with Trow Associates, designer of the Whitefish installation, said the school needed a new wastewater system to replace the use of a sewage lagoon it has been using since the 1960s.
“The school has concerns over liability, mosquitoes, odour and illegal dumping regarding the lagoon and they wanted a new system designed and installed,” said Firla. The clay soil on site did not offer the proper percolation rate for a standard septic system, he said.
Because a commercial sized septic and field bed system requires a lot of space, the school asked Trow to come up with a smaller sized system.
“We had just investigated a system for a client locally using the Bionest technology and went with that.”
Between the standard-sized 25 cubic metre septic tank and the field bed, is a 15 cubic metre unit that measures 1.5 metres high, two metres wide and 4.5 metres long. The unit is called a Bionest wastewater treatment system.
The system will operate more efficiently over a longer period of time and requires less space on the site, said Firla.
The downsized field bed that can handle 10,000 litres per day is sized at 30 metres by 30 metres.
“A smaller field bed means less excavation, less aggregate used and less space (is) required,” said Firla.
The wastewater leaving the field bed is cleaner than that of a conventional septic system process. This is important because the liquid eventually seeps into ground water or ends up in nearby water bodies.
“The wastewater will have a lower BOD (biological oxygen demand) going into adjacent water bodies. It will tie up much less oxygen that is required by fish or other life,” he said.
Firla said he would recommend the system to other clients in the north. For more information about the system, go to www.bionest.ca
Written by Jeff on August 11th, 2008 with no comments.
Read more articles on Composting in the schools and News.
This is going to be a whole new part of the FriendlyWormGuy website
(Seasonal Pictures From The FriendlyWormGuy Farm)
We live in Northern Ontario Canada, In our opinion the most wonderful place in Ontario, From fishing in the hundreds of lakes and rivers in our area, to snowmobling, skiing, skating to the change in season to Spring when all comes back to life again. Our farm is 160 acres or .5 mile by .5 mile square in size, We have a wonderland full of great pictures,
I am going to start with some pictures taken here this week, from scary clouds to a wonderful rainbow.
It is so dark!! this was taken late afternoon
Now to some of the wonderful pics after the clouds moved on a little.
This is the reason, our area is called Rainbow Country
For those of you readers that like to look at some great pictures, from flower pics in summer to winter pics, and the other great pics we are able to catch on this wonderful farm of ours, check back regularly to see more great pictures.
Hope you enjoy this part of the website as much as we do.
Jeff and Lorie.
Written by Jeff on August 10th, 2008 with no comments.
Read more articles on News and Seasonal pictures from the FriendlyWormGuy farm and playing around.
Thinking of some fun stuff to do, I decided it was time to start tracking the growth of our GIANT SUNFLOWER,
My mother (Suzanne) and myself standing beside the 8.5′ Giant Sunflower.
In the last week this Sunflower has took off like crazy! So it was time to start tracking the growth of this Sunflower, Yes it is being fertilized with Worm Castings. Today I got the tape out, 8.5′ tall, the flower has not started to develop yet, and we still have alot of growing season. Who knows, this thing could hit 12-14′ we’ll have to wait and see!!
I will update again in a week! please follow this post, it is going to be fun!
Jeff
Written by Jeff on August 6th, 2008 with 3 comments.
Read more articles on About Earthworms and News and Worm Stories and playing around.
I am a new worm farmer and you have answered my questions before when no one else did, thank you.
My self, my wife,Tonsie and our friends Mike brown and his wife, Mary, formed a partnership and we are now worm farmers. We have a newly build worm bin that is 3 feet by 6 feet and we have 3 lbs. of European night crawlers. The bin is made out of plywood above ground and is 24 inches deep.
I did’nt say we were big worm farmers at this time but we will be.
I have a couple of questions for you, I hope you have time to answer.
1. How can I seperate the castings from the vermicompost to get pure worm castings? (I saw your machine, us geting one like that would be difficult at best.)
2. We plan on selling both bait worms and castings. How many lbs. of worms will we need before we can start marketing the worms?
3. How many bins 3? by 6? will we need to start producing enough castings to start selling?
4. I guess I am asking you how many lbs of worms do we keed before we really are “Worm farmers”?
5. I plan on ordering more worms in September, if I order from you how am I assured that I am getting pure European Night Crawlers and not a mixture of Reds and Euros? (They will be shipped to Washington State.)
thanks
Rod
Hi Rod
Rod has asked some Great questions, That I and alot of other worm farmers thought of before they started in the worm business.(I am sure) I will try and answer these questions as well as I can, He has asked five questions, I will asnwer them in order that he asked them in order from 1-5
1) Seperating worm castings is a job in its self, I seperated my worm castings by hand for a year or so before I got my Fanning Mill, even with the fanning mill the vermicompost needs to be on the dry side before the fanning mill can do the Great job that it does. So it really depends on how much investment you would like to, or can put into the business, you can also buy a rotating worm harvester, that is fairly costly. the final worm castings needs to be screened through a 1/8″ screen.
2) This is a hard one to answer, I would try to keep a stock of 100 lbs of worms, just for worm casting production alone, If you are planning on being a player in the castings business.
As far as how many worms to sell worms, It would be nice to have a stock of 100 lbs or more, if you get very busy, this # is not very much.
3)Your worm bins 3 by 6 by 2 feet deep are a great size for worm beds, not too big, not too small, A very nice size to work with.
When stocking a worm bed like this,the rule is 1 lb of composting worms to 1 sq ft of surface area in your bin, so the surface area of your 3? by 6? worm bed is 18 sq feet.
So you should be stocking this bed with 18 lbs of worms, If you would like to start slow, I still recommend starting with at least 10 lbs.
4) When are we worm farmers?? haha..
When do you think you are a worm farmer? I think if you have worm beds 3? by 6? you are already a worm farmer,I am sure I have alot of customers with a few pounds of worms calling them selves worm farmers, this is a matter of opinion depending on each individual.
5) I have purchased my original stock from reputable worm farmers, They have been in the business for a long time. I do mix my worms (reds and euros) for casting production only, To keep the worms seperated as to each breed, the 2 breeds need to be a far distance away from each other, along with well made beds to keep the 2 breeds apart. Also another thing to keep in mind is, when making outdoor beds and your plans are to maintain the pure breed of worm, you need to have something between the native worms and the soil that you have just made the bed in, remember your native worms will enjoy eating the bedding you added to your nice pure breed of worms you are going to add to that bed, thus mixing the worms up.
I hope this answers some questions, I would really like to hear back on this one, There are alot of great ideas and methods of worm farming out there, So lets hear your comments
Jeff (The Friendly Worm Guy)
Written by Jeff on August 3rd, 2008 with 3 comments.
Read more articles on About Earthworms and Composting with composting worms and News and Reader Questions and Worm Stories.
In this post you will see some of my worm beds, and how I harvest my worm castings.
Here is one of my Worm Beds. It is 8′ long 3′ wide, This bed is used for Worm Castings production for the most part. These beds are harvested and rebedded on a monthly bases. The bedding is pre-composted, These beds are housed with Red Wigglers and European Nightcrawlers.
I take the used up Vermicompost and screen it through a 1/4″ screen, which seperates all the larger worms from the small worms and worm cocoons(worm eggs)and the worm castings.At this point the larger worms go back into this same bed to produce Worm Castings and alot of egg cocoons to be harvested again in another month.
In this pic you can see the Vermicompost on the floor after being screened through the 1/4″ screen.
The pile on the floor, as I said before is all the little worms, egg cocoons, and the Worm Castings that were in the 18 cubic ft worm bed.
At this point this pile of vermicompost is left to sit for a week or two before it is moved out to the Old Fanning Mill, to produce the final product (Worm Castings)
Here is the link to my Harvesting video.Over at my Worm Farmer friends website www.redwormcomposting.com.Harvesting Worm Castings
Here is a picture of my Worm Castings after they go through the old Fanning Mill, Bagged up and ready to be sold to you people to make all your plants grow like never before. Check out my PROMO ITEMS at the top of the page.
Written by Jeff on July 21st, 2008 with 2 comments.
Read more articles on About Earthworms and Composting with composting worms and Friendly Worm Guy Store and News and Videos and Worm Stories.
The Slogan (it’s a EUROPEAN you’re A SEEIN’ That’s catchin’ all the FISH!!) Was created by my wife Lorie. In an effort to bring attention to this very NEW to North America, Fishing and composting worm The European Nightcrawler. (Eisenia hortensis)
Mass of European Nightcrawlers(Eisenia hortensis)
I have been raising The European Nightcrawler for 4 years now, In the past 2 years I have raised two breeds, The European N/C and the Red Wiggler (Eisenia fetida).These two breeds mixed in large composting beds work very well at producing quality worm castings, My beds are 8″-12″ in depth, the reds are the top feeders. example ( the reds are composting in the top 3-4″. The Euros are composting from 4-12″ levels of my composting worm beds) Both these breeds work very well on their own as well, at all levels of the composting bins. I have also been told by a number of people, that the Reds will take over the beds( out number the Euros ) over time, I have not seen this happen as of yet, This past spring I would have said those people were right, I had greater #’s of reds and less Euros, In the last month or two now, the euros have came back in big #’s and there is now more euros in the beds then reds. Yes readers now you will think I have just been picking out the reds, this is not the fact. These beds are for producing Worm Castings, I harvest the worm casting and I return the stock of worms from each bed back to their same beds,To compost the new bedding I have just added.
As far as taking care of each breed, All I had read about the euros, and their want to crawl, out of the beds, bins etc. Is wrong in my opinion, I have had alot more problems with the Red Wigglers crawling, then I have ever had with the European N/C. On another note: It is hard to kill Euros, and in the last few years I have found my self a couple of times trying to keep the reds alive. example, The Euros take change in their environments better then the Reds do. I am not sure why the Red Wigglers are still known as the best composting worm in North America. I am sure in the not too far future we will see the European N/C gain alot of ground in the composting field. There is also Millions of Fisherman out there that think the Reds are just not big enough to use for fishing. Where as the European N/C can grow to 5″ very easily, in a composting bin, and close to the size of the Canadian N/C if the Euro has space to grow.
These worms produce quality WORM CASTINGS
Please Check out the Promo I have going at the moment on these quality Worm Castings.
The Friendly Worm Guy
Written by Jeff on July 18th, 2008 with 2 comments.
Read more articles on About Earthworms and Composting with composting worms and Friendly Worm Guy Store and News and Worm Stories.
WOW! Sure has been awhile since I have been able to write! I have a day or 2 to get a couple posts out before we get into July.
First I will talk about wooden worm bins, Wood worm bins keep worms much cooler then the plastic bins in summer temps.
These bins are now For Sale at Friendly Worm Guy. go to Our Products
Step 1
Step 2
Step 3
Step 4
Step 5 Complete..
There is also a great post about fighting summer heat over at www.redwormcomposting.com.
Here is the link http://www.redwormcomposting.com/worm-composting/help-your-worms-beat-the-heat/
Thanks
The Friendly Worm Guy
Written by Jeff on June 30th, 2008 with 3 comments.
Read more articles on About Earthworms and Composting with composting worms and News and Worm Stories.
For a while now I have been trying to come up with an upward flow worm bin, that has stacking trays deep enough to bury the food waste, to make the bin work very well! Yes they are all over the internet, I have tried a few. but in almost all the cases, the trays were NOT deep enough to bury the food waste well. on average the trays were only 3″-4″ high. And in turn the bin maybe gets fruit flies etc,
This is a picture with 1 tray added. I will also say, I am not a person that is very good with woodworking, I know how to raise worms! I know what kind of environment the worm needs to live and compost well. so I was able to get a friend of mine to help me build these bins. I told him the way we needed to build it and he did.
First of all my trays are 6″ high, not 3″ or 4″ high. This gives us a whole 2″ higher, yes it doesn’t sound like much but it really is. 2″ is a great deal to bury that food waste properly
This is a picture of the bin complete, with all trays added. I made these bins to put them into our local school board’s classrooms, The reason I added the 2″ to each tray is to make sure these bins will not produce fruit flies, The main concern of the School Board is the fruit flies, These bins will not produce fruit flies, if all food waste is buried properly. In the short future I hope to have one of these bins in all our local schools. if all goes well!!!
Written by Jeff on May 20th, 2008 with no comments.
Read more articles on About Earthworms and Composting in the schools and Composting with composting worms and News and Worm Stories.
